Safety 1st Advancer Manual do Operador descarregar pdf (Página 46)

Environmental Remediation Drilling

Safety Guideline

Page 46 of 132

Do not touch any person who may be in contact with the current.

If a rescue is attempted, use a dry, clean rope or a dry, unpainted wood pole to remove the victim. Do not

touch the victim until he has been removed from the current.

If the victim is unconscious when released from the current, check his breathing and pulse and, if needed,

begin CPR immediately.

• Under most circumstances, the operator and other personnel on the seat of the vehicle should remain

seated and not leave the vehicle. Do not move or touch any part, particularly a metallic part, of the

vehicle or the drill rig.

• If you are on the ground, stay away from the vehicle and the drill rig, do not let others get near the

vehicle and the drill rig, and seek assistance from local emergency personnel, such as the police or fire

department.

4.2 - Raising the Mast

Once the rig has been properly stabilized and the location cleared of overhead obstructions, the rig mast can

be raised. Specific items to consider include the following:

Starting the engine

• Start all engines in accordance with the manufacturer's manual.

• All drilling rig personnel and visitors should be instructed to stand clear of the drilling rig immediately

prior to and during starting of an engine.

• Check for warning or lockout tags on the engine controls. If a warning or lockout tag is attached to the

switch, do not start the engine until the warning tag has been removed by the person who installed it.

• Verify all gear boxes are in neutral, all hoist levers are disengaged, all hydraulic levers are in the correct

non-actuating positions, and the cathead rope is not on the cathead before starting a drilling rig engine.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 131 132

Sem comentários

Safety 1st Advancer Manual do Operador Página 46